S2 — Principal Solar Semidiurnal
The gravitational tidal force exerted by the Sun as Earth rotates once every 24 mean solar hours....
The M2 constituent represents the principal lunar semidiurnal component in harmonic tidal prediction. In classical analog tide-predicting machines, this partial wave was generated by an oscillating crank and Scotch yoke driven by a designated gear train.
28.984104°/hr12.4206 hours255.555100% of M2The primary gravitational tide raised by the rotation of the Earth relative to the orbiting Moon twice per lunar day.
In shallow estuaries, bottom friction distorts the symmetric M2 sinusoidal waveform, steepening the flood and transferring acoustic energy into the harmonic overtides M4, M6, and M8.
The heaviest crank, most robust Scotch yoke, and primary reference drive on every historic brass predictor. In Kelvin’s 1872 prototype and US Coast Survey Machine No. 2, the M2 shaft drove the master clockwork timing.
Gear Ratio Implementation:
Direct primary train approximation: 28.9841042°/solar hour; often cut with prime-tooth gear ratios (such as 137:142 or 57:59 compound trains) to maintain sub-second accuracy over a 365-day run.
On historic calculators such as US Coast Survey Machine No. 2 ("Brass Brains") and the Bidston Observatory Doodson-Légé machines, each shaft had to maintain exact angular synchronisation with solar clockwork over 8,760 hours of continuous calculation without drifting out of phase.
How did an analog computer technician dial the M2 constituent into a brass tide-predicting machine before a 365-day charting run? Follow the standard hydrographic office protocol:
Analog computers were governed by the laws of friction, backlash, and mechanical tolerances. Operating the M2 constituent presented distinct physical challenges:
| Known Error Source | Observed Mechanical Symptom | Historical Corrective Action |
|---|---|---|
| Wire stretch under peak amplitude displacement | Pen under-traces peak spring high water by 1–3% on continuous runs. | Apply dead-weight pre-tensioning to the phosphor-bronze wire ribbon 24 hours prior to charting and verify zero-datum return. |
For a complete review of analog calculation tolerances, see our study on Friction, Backlash, and Wire Stretch: Where Error Lived in Brass Computers.
Because each body of water resonates with different astronomical frequencies, the amplitude of M2 varies dramatically around the globe:
| Reference Harbor | Typical Amplitude | Local Tidal Characteristics |
|---|---|---|
| Brest, France | 3.05 m | Classic North Atlantic semidiurnal tide dominated completely by M2. |
| Boston Harbor, USA | 1.42 m | High semidiurnal range where M2 accounts for >85% of total tidal kinetic energy. |
| Liverpool, UK | 3.12 m | Massive resonance basin amplifying M2 and requiring heavy damping calibration. |
Observe how M2 interferes with other harmonic waves on our virtual brass analog synthesizer. Adjust frequency, amplitude, and phase angle interactively.
Launch Harmonic Synthesizer ›The Moon exerts more than double the tidal tractive force of the Sun due to its proximity to Earth. Because Earth completes one rotation beneath the Moon every 24.84 hours, two tidal bulges pass each location daily, yielding M2 at 12.42 hours.
Operators adjusted a knurled brass micrometer on the M2 crank disk to set the amplitude H in inches or centimetres, then rotated the constituent shaft until the circular dial indicated the Greenwich phase lag kappa minus the astronomical argument (V0 + u).
Frictional drag in shallow channels dissipates energy and slows the wave trough more than the crest, causing an asymmetric distortion that generates the overtides M4 and M6.
The gravitational tidal force exerted by the Sun as Earth rotates once every 24 mean solar hours....
The variation in lunar distance due to the elliptical eccentricity of the Moon’s orbit as it moves b...
The declination of both the Moon and Sun north and south of Earth’s equator during their orbital cyc...
The Moon’s orbital motion combined with its declination relative to the Earth’s equator....