Home › Constituents › MS4

MS4 — Quarter-Diurnal Compound Interaction

The MS4 constituent represents the quarter-diurnal compound interaction component in harmonic tidal prediction. In classical analog tide-predicting machines, this partial wave was generated by an oscillating crank and Scotch yoke driven by a designated gear train.

⚡ Key Harmonic Constants for MS4

Tidal Species: Shallow-Water Overtide
Angular Speed: 58.984104°/hr
Astronomical Period: 6.1033 hours
Doodson Number: 473.555
Equilibrium Force: 8.5% of M2
Origin: Hydrodynamic overtide

1. Astronomical & Hydrodynamic Origin

Non-linear hydrodynamic interaction between the two primary gravitational waves, M2 and S2, in shallow coastal basins.

Varies with the spring-neap cycle, amplifying estuarine distortion during spring tides and reducing it during neaps.

2. Mechanical Role in Historical Tide Predictors

Compound constituent whose angular speed equals the sum of M2 and S2 speeds (28.9841042° + 30.0000000° = 58.9841042°/hr). Required specialized sum-frequency gearing.

Gear Ratio Implementation:
High-speed gear train modeling 58.9841042°/hr; often linked through a differential summing gear or calculated as an independent ratio.

On historic calculators such as US Coast Survey Machine No. 2 ("Brass Brains") and the Bidston Observatory Doodson-Légé machines, each shaft had to maintain exact angular synchronisation with solar clockwork over 8,760 hours of continuous calculation without drifting out of phase.

3. Practical Operator Setup: 3-Step Configuration Guide

How did an analog computer technician dial the MS4 constituent into a brass tide-predicting machine before a 365-day charting run? Follow the standard hydrographic office protocol:

  1. Step 1: Set Crank Throw (Amplitude H)
    Calculate MS4 amplitude and phase from harmonic analysis of 1 year of continuous river gauge data.
  2. Step 2: Align Initial Epoch Angle (Phase Lag κ)
    Set the high-speed MS4 crank slider to the designated millimetre offset.
  3. Step 3: Pulley Wire Tension Verification
    Verify pulley alignment to prevent the wire from hopping out of the groove during rapid 6-hour cycles.

4. Physical Error & Mechanical Troubleshooting

Analog computers were governed by the laws of friction, backlash, and mechanical tolerances. Operating the MS4 constituent presented distinct physical challenges:

Known Error Source Observed Mechanical Symptom Historical Corrective Action
Wire jumping off pulley groove during rapid stroke reversals Catastrophic pen deviation and loss of continuous calibration. Ensure all high-speed overtide pulleys have deep V-grooves and guard pins fitted over the wire entry point.

For a complete review of analog calculation tolerances, see our study on Friction, Backlash, and Wire Stretch: Where Error Lived in Brass Computers.

5. Harbor Case Studies: Typical Amplitudes for MS4

Because each body of water resonates with different astronomical frequencies, the amplitude of MS4 varies dramatically around the globe:

Reference Harbor Typical Amplitude Local Tidal Characteristics
Thames Estuary / London, UK 0.22 m Essential for accurate flood and ebb velocity forecasts in commercial shipping lanes.
Scheldt River / Antwerp, Belgium 0.18 m Refines curve shape in long, shallow navigational river channels.
Bristol Channel, UK 0.30 m Severe non-linear interaction compounding the world’s second-largest tidal range.

Simulate MS4 in Real-Time

Observe how MS4 interferes with other harmonic waves on our virtual brass analog synthesizer. Adjust frequency, amplitude, and phase angle interactively.

Launch Harmonic Synthesizer ›

Frequently Asked Questions

What is a "compound constituent"?

A compound constituent is a tidal harmonic whose frequency is the mathematical sum or difference of two or more astronomical frequencies, created by fluid dynamics rather than direct celestial attraction.

Why does MS4 matter to harbor pilots?

MS4 affects the rate of rise and fall of the tide. In tight navigational channels, knowing whether the tide will rise 1 metre in 45 minutes or 90 minutes determines when a deep-draft ship can safely enter.

Can MS4 be predicted without a tide machine?

Manual calculation of compound constituents across 365 days required thousands of trigonometric additions by hand; analog computers solved this instantly in real time.

Related Harmonic Constituents

Diurnal 15.04°/h

K1 — Luni-Solar Diurnal

The declination of both the Moon and Sun north and south of Earth’s equator during their orbital cyc...